Electrochemical–Thermal Evaluation of an Integrated Thermal Management System for Lithium‐Ion Battery Modules
Thermal management of lithium‐ion (Li‐ion) batteries using phase change materials (PCM) demonstrate advantages such as compactness and reduced weight compared to conventional active cooling...
Gallium Based Thermal Interface Material with High Compliance and Wettability
This study reports a gallium-based thermal interface material (GBTIM) consisting of gallium oxides dispersed uniformly into the 99 % gallium metal. The wettability of GBTIM with other materials is...
A Novel Approach to Support Structures Optimized for Heat Dissipation in SLM by Combining Process Simulation with Topology Optimization
Throughout the last decade, additive manufacturing (AM) processes have become increasingly relevant in different industries, e.g. medical, aerospace and tools, being on the verge to broad industrial...
Phase change microcapsules with lead tungstate shell for gamma radiation shielding and thermal energy storage
Novel microencapsulated phase change materials (MEPCMs) composed of the lead tungstate (PbWO4) shell and paraffin core were designed for shielding of gamma radiation as well as thermal energy...
Effect of various curing methods and addition of silica aerogel on mortar properties
Mechanical and thermal properties and porosity of aerogel-incorporated mortars exposed to various curing conditions (curing by wetting-drying, curing by magnesium sulphate (MgSO4), and water curing)...
Auto-coherent homogenization applied to the assessment of thermal conductivity: case of sugar cane bagasse fibers and moisture content effect
Auto-coherent homogenization is used to evaluate the thermal conductivity of sugar cane bagasse fibers in vegetable fibers/cement composites. The moisture content effect on the thermal conductivity...
Investigation of the Influence of Inert Solids on Ignition Sensitivity of Organic Powder
This work presents the results of the experimental characterization of the ignition sensitivity of solid inertant/combustible powders mixtures. Three inert solids (alumina, Kieselguhr, aerosil) and...
Measuring the Thermal Conductivity of Heat Transfer Fluids via the Modified Transient Plane Source
Heat transfer fluids are often a critical performance component in industrial processes and system design. Fluids are used in heat dissipation to maintain stable operating temperatures in a variety...
Underground warehouses for food storage in the Dolomites (Eastern alps – Italy) and energy efficiency
Underground food storage represents an interesting solution to the increasing demand for new food storage space, combining this demand with sustainable land exploitation. It also reduces the energy...